After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.
While we've discussed validation in multiple articles, let's return to the basics. ASQA defines validation as a quality check of the assessment process.
In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
As per the standards, two kinds of validation are required.
The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.
The second type of validation verifies assessments are conducted according to the principles of assessment and rules of evidence.
This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.
Defining the Two Types of Assessment Validation
The Essence of Assessment Validation
As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
Our focus in this article will be on assessment tool validation.
Methods for Conducting Assessment Tool Validation
Having outlined the two types of validation, it’s time to dive into assessment tool validation.
When Should You Conduct Assessment Tool Validation?
The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.
There's no requirement to wait for your next 5-year cycle validation schedule. Validate new resources promptly to ensure they’re ready for students.
However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:
- resources are updated
- new training products are added on scope
- your course includes training product updates
- identify your learning resources as a risk during your risk assessment
ASQA applies a risk-based regulation approach, expecting RTOs to do regular risk assessments. Hence, student complaints about learning resources are a good reason for assessment tool validation.
Identifying Training Products for Validation
Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.
Resources Needed to Start Assessment Tool Validation
Course Materials
For validating your assessment tools, you will need the full array of your learning resources:
Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.
Learner/student workbook – ensure it's appropriate as an assessment tool. Check if the instructions are clear and answer fields are adequate. This is a frequent issue.
Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item are present. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they fit the assessment task and address unit requirements.
Assessment Validation Panel
Clause 1.11 outlines the requirements for validation panel members, indicating validation can be done by one or more individuals. Typically, RTOs require all trainers and assessors to attend, occasionally inviting industry experts.
Overall, your validation panel should have:
Vocational competencies and current industry skills that relate to the unit being validated
Current knowledge and skills related to vocational teaching and learning
Any one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its replacement
Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.
Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.
A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Instructions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Examine?
As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.
Basic Principles of Assessment
Fairness – Does the assessment process ensure equal opportunity and access for everyone?
Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?
Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for read more assessing the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Fundamental Rules of Evidence
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool confirm that the work is the candidate’s own?
Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?
Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:
Be Consistent with Your Teachings
Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
changing nappies
prepare bottles, feed infants from bottles, and clean equipment
solid food preparation and feeding babies
appropriately respond to baby signs and cues
prepare and settle infants for rest
monitor and promote physical exploration and gross motor skills suitable for the age
Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
Entire or Not Competent
Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be More Specific?
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What information can be included in a work package?
Possible answers may include:
Necessary resources
Relevant expenses
Activity duration
Appointed duties and responsibilities
When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.
This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:
Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.
Possible answers may include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, personal protective equipment
Work area and ground conditions – eliminating hazards, isolation, engineering
People – isolation, engineering, administrative controls
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, engineering controls, administration
Equipment or machinery – isolating, engineering, administration
Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.
Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.